How to SETUP Buffalo WBMR-HP-GB modem router in 1 minute.
2Buffalo WBMR-HP-GB Configuration Step by Step:
Please follow the below steps to configure Buffalo WBMR-HP-GB modem
Establish a connection between the device and the router via network cable or Wi-Fi (if there’s
a WIFI password you have to check bottom of the router. If you turn the router over, you
should see a sticker, and one of the pieces of information should say something like “Wi-Fi
Password” or “WPA passcode.”)
Open a browser and type 192.168.11.1 in the address bar
You will be prompted to enter Username: root and Password keep it blank then click OK
Click Internet/LAN in the top navigation pane
Select RFC2516 PPPOE as Encapsulation mode and Multimode as modulation
Choose LLC as Multiplexing and disable Auto Detect to type VPI and VCI manually
In Virtual Circuit VPI should be 0 if DSP is Ogero and 8 If DSP is GDS while VCI should be 35
Scroll down to PPPoE Settings
Type ADSL username and password then click Apply to save configuration
Click Wireless Configuration then Basic
In SSID textbox type wireless Name and Select WPA/WPA2 mixedmode-PSK as Wireless
Authentication
Select TKIP/AES mixedmode as Wireless Encryption
In WPA-PSK (Pre-Shared Key) type wireless password and click Apply (safest passwords are
long and contain at least 8 digits of mixed letters, number)