Belkin F9J1105 configuration:
Please follow the below steps to configure Belkin F9J1105 modem
Establish a connection between the device and the router via network cable or Wi-Fi (if Wi-Fi is protected by a password you have to check the label on the bottom of the router)
Open a browser and type 192.168.2.1 in the address bar then click login on the top right corner
You will be prompted to enter your Password and you simply need to click the submit button since no password is set by default
Click on Connection Type under Internet WAN
Select PPPoE as the connection type then click Next
Type ADSL Username and Password then enter VPI and VCI
VPI should be 0 in case DSP is Ogero and 8 in case DSP is GDS while VCI should be 35
Select LLC Encapsulation then click Apply Changes and wait 20 seconds
Click on Channel and SSID under Wireless to configure 2.4 and 5GHz networks
In SSID Textboxes type wireless name then make sure Broadcast SSID is checked and click Apply
Changes
Click on Security under Wireless and make Security Mode is WPA/WPA2-Personal (PSK)
Select WPA2-PSK as Authentication then in the Pre-Shared Key(PSK) textbox type wireless password and click Apply Changes (safest passwords are long and contain at least 8 digits of mixed letters,
number)
3