Howto build virtualization home lab #1 Unboxing 990FXA-UD5, AMD FX 8350, Thermalright 140BW

Channel:
Austria Donkey Learning IT
Subscribers:
39,000
Published on ● Video Link: https://www.youtube.com/watch?v=rxoILU_NRuw


Duration: 21:34
1,918 views
12

Here the Gigabyte 990FXA-UD5 motherboard (AMD Socket AM3+) is being unboxed together with the AMD FX 8350 CPU, and the Thermalright True Spirit 140BW heat sink and cooler.
I go over the procedure of inspecting the MoBo and other components, physically installing the CPU into the ZIF socket. A closer look on the 140BW heat sink is also presented.
The installation of the 140BW heat sink and fan is rather complicated, so this will be shown in the followup video #2.

The part selection and the criteria I used for the components was presented in this video:
https://www.youtube.com/watch?v=hPIHZPNlfuU


These parts will be serving mainly as a virtualization host for GNS3,
Linux KVM, but it would run VMware ESXi 6.0 as well.



Other Videos By Donkey Learning IT


2016-08-14Corsair VS550 vs Be Quiet! 500W power supply side-by-side comparison and overview
2016-08-02APC PDU #3 Howto reset the password under linux and windows step-by-step
2016-07-28APC 7920 PDU #2 DIY cheap serial console cable for password reset
2016-07-17APC 7920 PDU #1 overview, usage scenarios and teardown
2016-07-11DIY cheap microphone preamp for Canon DSLR #3 case build and putting it together
2016-07-10DIY cheap microphone preamp for Canon DSLR #2 soldering components into PCB
2016-07-10DIY cheap microphone preamp for Canon DSLR #1 component selection and tools
2016-06-04Howto build virtualization home lab #4 HP NC364T cards for GNS3 home lab and MoBo install
2016-06-04Howto build virtualization home lab #3 RAM instal and Fractal Design XL R2 case preparation
2016-06-03Howto build virtualization home lab #2 Thermalright 140BW cooler install on Gigabyte 990FXA-UD5
2016-06-02Howto build virtualization home lab #1 Unboxing 990FXA-UD5, AMD FX 8350, Thermalright 140BW
2016-05-28Howto build virtualization home lab for VMware, KVM, GNS3 and ZFS: Part selection (part2)
2016-05-26Howto build virtualization home lab for VMware, KVM, GNS3 and ZFS: Part selection
2016-03-07Cisco stackwise #1 Basics tutorial on the switch stackwise for CCNA
2016-02-26Cisco 3750G Gigabit Layer 3 switch PSU & MoBo component level teardown: CCNA lab and repair
2016-02-20Cisco 3750G Gigabit Layer 3 switch teardown, a detailed overview for CCNA lab and repair
2016-02-17Cisco 1941 ISR router teardown an detailed overview for CCNA lab and repair
2016-02-11Cisco ASA5505 firewall teardown an detailed overview for CCNA security lab and repair
2016-02-06Cisco 2960G Switch teardown an detailed overview for CCNA lab and repair -Part2
2016-02-04Cisco 2960G Switch teardown an detailed overview for CCNA lab and repair -Part1


Tags:
990-FXA-UD5
FX 8350
Ture Spirit 140BW
Unboxing
Gigabyte
AMD FX 8350
virtualization