Lets make: Micro FPV racing gates from cardboard and tape

Channel:
United Kingdom CurryKitten
Subscribers:
27,400
Published on ● Video Link: https://www.youtube.com/watch?v=q8ZuVOUWEak


Duration: 5:25
1,726 views
49

The weather is not playing ball, and I'm starting to get shaky from the lack of proper flying. So once again I needed to try and make my own amusement by trying to make little racing gates for the E010 micro quad.

As I hope you can see, it went ok - but a combination of more practice needed along with perhaps a better thought out course, and maybe slightly raised gates would help. The point is though, that putting up little gates and things is pretty easy, and becomes 1000x more fun with a few of you messing around.

My E010 build was made up from the following bits and bobs from Banggood (affiliate links used) -

E010 frame -
http://www.banggood.com/Eachine-E010-RC-Quadcopter-Spares-Parts-Frame-p-1081723.html?p=E81211714085201408XQ

Props -
http://www.banggood.com/Eachine-E010-Blade-Inductrix-Tiny-Whoop-RC-Quadcopter-Spares-Parts-Blades-Propeller-p-1079425.html?p=E81211714085201408XQ

Beecore F3 Flight controller -
http://www.banggood.com/Beecore-F3_EVO_Brushed-ACRO-Flight-Control-Board-DSM2-For-Inductrix-Tiny-Whoop-Eachine-E010-p-1089021.html?p=E81211714085201408XQ

Chaoli 6x15mm Bruches Motors -
http://www.banggood.com/4X-Chaoli-CL-615-6x15mm-Coreless-Motor-for-90mm-130mm-DIY-Micro-FPV-Quadcopter-Frame-Blade-Inductrix-p-1074157.html?p=E81211714085201408XQ

VTX/Camera -
http://www.banggood.com/Eachine-TX03-Super-Mini-025mW50mW200mW-Switchable-AIO-5_8G-72CH-VTX-600TVL-13-Cmos-FPV-Camera-p-1104884.html?p=E81211714085201408XQ

Camera mount (I printed mine) -
http://www.banggood.com/Camera-Frame-Mount-For-Eachine-TX03-FPV-Camera-E010-E010C-E010S-Blade-Inductrix-Tiny-Whoop-p-1116155.html?p=E81211714085201408XQ

Battery lead I picked up from ebay -
http://www.ebay.co.uk/itm/132048132216?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

If you liked this video and want to show your support - either through subscribing, using an affiliate link, becoming a Patreon supporter or buying a T-shirt, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/



Other Videos By CurryKitten


2017-02-08FPV Review: Range testing the Eachine TX03 - with added fails
2017-02-06FPV Racing: a 14 lipo indoor micro quad race session (may involve crashing)
2017-02-04Tutorial: How to reflash firmware on the FrSky XM+
2017-01-30FPV Micro racing: The Gnat build
2017-01-28FPV Tutorial: Tips for new quad Flyers Part 4 - Co-ordinated turns
2017-01-27FPV Tutorial: Tips for new quad Flyers Part 3 - Camera angle
2017-01-26FPV Tutorial: Tips for new quad Flyers Part 2 - Keep flying forwards
2017-01-25FPV Tutorial: Tips for new quad Flyers Part 1 - Use Acro mode
2017-01-25FPV Tutorial: Tips for new quad Flyers - Intro and location advice
2017-01-23Problems with RealAcc/True-D/LaForge with ImmersionRC 600mw VTX's
2017-01-18Lets make: Micro FPV racing gates from cardboard and tape
2017-01-15FPV first look: The Eachine TX03 mini VTX/Cam
2017-01-12The MiniRaceWing - an Interesting looking Kickstarter project
2017-01-09Micro FPV: Moving from an Inductrix to an Eachine E010 build
2017-01-05Another look at the Realacc RX5808 Diversity system with the FatShark covers
2016-12-31FPV Rant: Should HobbyKing shuffle off and die ?
2016-12-30Firefly 7s update - Firmware fix and making it fit a gimbal
2016-12-23FPV Quick Tip: Charging 1s lipos
2016-12-17Finders Keepers ? Tips for gettng your lost drone back
2016-12-16FPV in review: The 2016 highlights
2016-12-15FPV First look: DYS 2206-2600KV Fire motors, supplied by Gearbest


Tags:
fpv
micro
tiny
whoop
eachine
e010
inductrix
drone
race
diy
gates
racing
crash
banggood