FPV Micro racing: The Gnat build

Channel:
United Kingdom CurryKitten
Subscribers:
27,400
Published on ● Video Link: https://www.youtube.com/watch?v=XQUxVmkL77M


Duration: 13:03
1,653 views
40

Had a great time meeting up with my local micro-racers... this time with a nice build of my own to use !

Things I used in this build (banggood links are affiliate links) -

Kevin's Gnat frame -
http://www.thingiverse.com/thing:1248726

4 x Chaoli 7x20mm motors -
http://www.banggood.com/4X-Chaoli-CL-720-7x20mm-Coreless-Motor-for-90mm-150mm-DIY-Micro-FPV-RC-Quadcopter-Frame-p-1070123.html?p=E81211714085201408XQ

Eachine TX03 VTX/Camera (I reused another camera, but this is what I would have used otherwise) -
http://www.banggood.com/Eachine-TX03-Super-Mini-025mW50mW200mW-Switchable-AIO-5_8G-72CH-VTX-600TVL-13-Cmos-FPV-Camera-p-1104884.html?p=E81211714085201408XQ

Eachine SKYkylin-F3 Brushed FC (mine is a FrSky compatable, but look on the site of DSM/FlySky compatable boards) -
http://www.banggood.com/Eachine-SKYkylin-F3-Brushed-Flight-Control-Board-Built-in-FRSKY-Compatible-8CH-Receiver-p-1100694.html?p=E81211714085201408XQ

3-bladed super-cute props -
http://www.banggood.com/5X-Eachine-3-Blade-Propeller-Prop-20Pcs-for-7mm-8_5x20mm-Coreless-Motor-DIY-Micro-FPV-Quadcopter-p-1059073.html?p=E81211714085201408XQ

If you liked this video and want to show your support - either through subscribing, using an affiliate link, becoming a Patreon supporter or buying a T-shirt, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/



Other Videos By CurryKitten


2017-03-23FPV First Look: FlyColor Raptor 390, supplied by Gearbest
2017-03-08A GPS OSD for £10 ! : Setting up a standalone MicroMinimOSD Part 2
2017-03-03FPV Tutorial: Setting up the MicroMinimOSD as a standalone OSD (no flight controller)
2017-02-24FPV Tutorial: Tips for new quad Flyers Part 6 - How to find your crashed quad
2017-02-22New FPV Build: Wii WIng kit received !
2017-02-20FPV Tutorial: Tips for new quad Flyers Part 5 - Power setups and prop choices
2017-02-13Dog FPV - featuring Roshi
2017-02-08FPV Review: Range testing the Eachine TX03 - with added fails
2017-02-06FPV Racing: a 14 lipo indoor micro quad race session (may involve crashing)
2017-02-04Tutorial: How to reflash firmware on the FrSky XM+
2017-01-30FPV Micro racing: The Gnat build
2017-01-28FPV Tutorial: Tips for new quad Flyers Part 4 - Co-ordinated turns
2017-01-27FPV Tutorial: Tips for new quad Flyers Part 3 - Camera angle
2017-01-26FPV Tutorial: Tips for new quad Flyers Part 2 - Keep flying forwards
2017-01-25FPV Tutorial: Tips for new quad Flyers Part 1 - Use Acro mode
2017-01-25FPV Tutorial: Tips for new quad Flyers - Intro and location advice
2017-01-23Problems with RealAcc/True-D/LaForge with ImmersionRC 600mw VTX's
2017-01-18Lets make: Micro FPV racing gates from cardboard and tape
2017-01-15FPV first look: The Eachine TX03 mini VTX/Cam
2017-01-12The MiniRaceWing - an Interesting looking Kickstarter project
2017-01-09Micro FPV: Moving from an Inductrix to an Eachine E010 build


Tags:
fpv
race
quad
drone
indoor
micro
frsky
eachine
banggood
3d printing
abs
gnat
vtx
f3
flight controller