My two issues with Sovol SV06

Channel:

Geb Systems

Subscribers:

567

Published on September 15, 2023 6:01:32 PM ● Video Link: https://www.youtube.com/watch?v=-2oiPiFMABE

Duration: 3:48

972 views

11

My further experience is good with the Sovol SV06 printer. There are really only two things I consider issues:

- the bearing came in the box rattling which means I need to take the printer apart and grease it myself. Not ideal if this is your first 3D printer,

- after a power failure the printer will not keep the bed temperate. It will give you a prompt asking if you wanna resume or stop but if you are not around when that happens and about 15-20 minutes pass the PEI sheet will release the part = failed print.

Also I do not care about the old school style the printer copies, the lack of the stop switches etc etc I do not even care about the lack of a touch screen. As long as I can set a print job to it I do NOT care.