VORON 2 4 R2 MPX CBT BUILD SERIES PART 14 - CNC VORON TAP - A AND B BELT INSTALL AND TENSIONING

Channel:
New Zealand Westy Crypto
Subscribers:
6,220
Published on ● Video Link: https://www.youtube.com/watch?v=IpipCQDJI2U


Duration: 41:12
102 views
2

IN THIS VIDEO WE INSTALL THE CHAOTIC LABS CNC VORON TAP WITH THE A AND B BELTS + TENSION THE BELTS.
NOTE: THIS IS MY OWN METHOD AND TENSION. I HAVE SET THE FOLLOWING UP-
- X RAIL IS PUSHED ALL THE WAY TO THE BACK OF THE A AND B DRIVE ASSEMBLY GANTRY FRAME TO ALLOW MAXIMUM AND EQUAL LENGHT TO ALLOW FOR UNIFORM TUNING OF THE BELTS RESONANCE.
- GANTRY MUST BE SQUARE (SEE PART 12 OF MY SERIES) https://youtu.be/wWSkmpLrjk0

- I SET THE TUNING TO 118-120 HZ.
This may or may not be correct, so use at your own risk. It just feels about right to me with my previous experience in automotive engineering, RC helicopter setup and motorcycle timing and drive belt assemblies.



Other Videos By Westy Crypto


2023-09-26VORON 2 4 R2 MPX CBT BUILD SERIES - PT 21- SB 2209 CANBUS INSTALLATION
2023-09-25VORON 2 4 R2 MPX CBT BUILD SERIES - PT 20 - COMPLETE ELECTRICALS INSTALLATION
2023-09-25VORON 2 4 R2 MPX CBT BUILD SERIES PY 20 - M8P Manta Main Board Jumpers & Din Rail Mounts
2023-09-25VORON 2 4 R2 MPX CBT BUILD SERIES - PT 18 CW2 (CLOCKWORK 2) EXTRUDER ASSEMBLY
2023-09-25VORON 2 4 R2 MPX CBT BUILD SERIES PART 17 -STEALTH FRONT COVER LEDS AND FAN ASSEMBLY
2023-09-25VORON 2 4 R2 MPX CBT BUILD SERIES PART 16 - RAPIDO HF HOT END UNBOX AND INSTALLATION
2023-09-24VORON 2 4 R2 MPX CBT BUILD SERIES Part 15 - INSTALL KLIPPER - M8P MANTA - CB1 - EBB SB 2209 CANBUS
2023-09-21Crypto Cold Wallet SecuX W20 X TrendMicro unboxing & Overview
2023-09-13Voron 2.4 R2 CBT (CANBUS TAP) Removing Can Bus wires from JST 2.5mm plug
2023-09-07CHAOTIC LABS VORON CNC TAP INSTALATION ISSUES AND SOLUTION
2023-09-05VORON 2 4 R2 MPX CBT BUILD SERIES PART 14 - CNC VORON TAP - A AND B BELT INSTALL AND TENSIONING
2023-09-04VORON 2.4 R2 MPX CBT BUILD SERIES - PART 13 PREPARIING AND LUBING CHAOTIC LABS CNC VORON TAP
2023-09-04VORON 2.4 R2 MPX CBT BUILD SERIES - PART 12 - SQUARING UP THE GANTRY
2023-09-04VORON 2.4 R2 MPX CBT BUILD SERIES - PART 11 - Z DRIVES AND TENSIONING
2023-08-30VORON 2.4 R2 MPX CBT BUILD SERIES - PART 10 HEATER AND PLATE ASSEMBLY
2023-08-30VORON 2.4 R2 MPX CBT BUILD SERIES - PART 8 GANTRY ASSEMBLY
2023-08-30VORON 2.4 R2 MPX CBT BUILD SERIES - PART 1.2 - VORON PRINTER TOOL AND GEAR LIST
2023-08-29VORON 2.4 R2 MPX CBT BUILD SERIES - PART 9 Z DRIVE ASSYS & Z IDLERS
2023-08-29VORON 2 4 R2 BUILD PART PART 8 GANTRY ASSEMBLY
2023-08-29VORON 2.4 R2 MPX CBT BUILD SERIES - PART 1.1 - MPX CBT KIT DIFFERENCES VS STD VORON
2023-08-28VORON 2.4 R2 MPX CBT BUILD SERIES - PART 7 THE FRAME ASSEMBLY