DIY PVC Racing Simulator Rig Part 3

Channel:

Blitzboy Gaming

Subscribers:

1,830

Published on November 24, 2019 2:59:01 PM ● Video Link: https://www.youtube.com/watch?v=R3SJJp8-oIo

Duration: 4:55

1,162 views

13

My attempt in building a racing simulator rig out of PVC pipes. PVC pipes is 2 inch pipes, class 7, full length is 5.8 metres. We are going to need at least 2 of those PVC pipes. Cut into multiple separate parts in different length to be piece together to build a racing rig.
In process of cutting the pipes, I made some mistakes , there are some cuts with the length which is non-usable. You will need some T connectors, 45 degree elbows, and 90 degree elbow joints to connect the parts together.

Thanks to SIMUL8R for his plans at this link as below.

https://goo.gl/MGNSc9

DIY Equipment
Tape Measure - https://t.productlink.io/a14q6e
Electronic Digital Display Vernier Caliper 0-150mm - https://t.productlink.io/a6q6c
PVC Glue Solvent Cement - https://t.productlink.io/a6q6a
EXTRAMAN Professional Miter Saw 255mm 1800w - https://t.productlink.io/a6q66
QLI-12TP2 + QLI 1205T QUASA 12V CORDLESS IMPACT DRILL (COMBO) - https://t.productlink.io/a6q65

Learn how you can monetize your Youtube videos - https://t.productlink.io/a14p7b