Fix Windows 10 disk errors

Subscribers:
4,240
Published on ● Video Link: https://www.youtube.com/watch?v=iwNGU6z46xM



Duration: 3:28
11 views
0


Here's how to Fix Windows 10 disk errors.
i. Here are some of the known errors when running Windows CHKDSK command:

CHKDSK is not running. This error can occur if CHKDSK is not installed on your computer, or if it is not enabled. To check if CHKDSK is installed on your computer, open a command prompt and type chkdsk /?. If you see a list of CHKDSK options, then CHKDSK is installed. To enable CHKDSK, open the Control Panel and go to System and Security - Administrative Tools - Services. Scroll down to the Chkdsk service and make sure that the Startup Type is set to Automatic.
CHKDSK cannot lock the drive. This error can occur if another program is using the drive that CHKDSK is trying to access. To fix this error, close any programs that are using the drive and then try running CHKDSK again.
CHKDSK found errors but was unable to fix them. This error can occur if the errors on the drive are too serious for CHKDSK to fix. In this case, you may need to repair or replace your hard drive.
CHKDSK is taking too long. This error can occur if the drive is very large or if there are a lot of errors on the drive. To speed up the process, you can try running CHKDSK in Safe Mode.
CHKDSK encountered an unexpected error. This error can occur if there is a problem with the drive or with the CHKDSK command. If you see this error, try running CHKDSK again. If the error persists, you may need to repair or replace your hard drive.
CHKDSK is not able to lock the volume. This error can occur if the volume is in use by another process. Try closing any open programs that might be using the volume, and then run CHKDSK again.
CHKDSK is not able to find the volume. This error can occur if the volume has been corrupted or deleted. Try running CHKDSK again, and if the error persists, you may need to restore the volume from a backup.
CHKDSK is not able to repair the volume. This error can occur if the damage to the volume is too severe. In this case, you may need to replace the hard drive.
CHKDSK found bad sectors but was unable to repair them. This error can occur if the bad sectors are too serious for CHKDSK to fix. In this case, you may need to repair or replace your hard drive.
CHKDSK encountered an I/O error. This error can occur if there is a problem with the hard drive or with the CHKDSK command. If you see this error, try running CHKDSK again. If the error persists, you may need to repair or replace your hard drive.
CHKDSK is not able to access the volume. This error can occur if the volume is encrypted or if you do not have the correct permissions. Try running CHKDSK again as an administrator. If the error persists, you may need to contact a professional for assistance.
CHKDSK is not able to start. This error can occur if there is a problem with the CHKDSK command or with the Windows operating system. If you see this error, try restarting your computer and running CHKDSK again. If the error persists, you may need to reinstall Windows.
CHKDSK is not able to complete. This error can occur if there is a problem with the hard drive or with the CHKDSK command. If you see this error, try running CHKDSK again. If the error persists, you may need to repair or replace your hard drive.
CHKDSK found errors but was unable to fix them all. This error can occur if the errors on the drive are too serious for CHKDSK to fix. In this case, you may need to repair or replace your hard drive.

ii. There are a number of better options for Windows CHKDSK. Some of these options include:

SpinRite: SpinRite is a commercial hard drive repair tool that is known for its ability to fix even the most severe hard drive errors.
HD Tune: HD Tune is a free hard drive diagnostic tool that can be used to check for errors, bad sectors, and other problems with your hard drive.
NTFS Data Recovery: NTFS Data Recovery is a free tool that can be used to recover data from formatted or damaged NTFS drives.
Restoration: Restoration is a free tool that can be used to repair file system errors, recover lost partitions, and clone hard drives.
Paragon Hard Disk Manager Free: Paragon Hard Disk Manager Free is a free tool that can be used to fix file system errors, recover lost partitions, and clone hard drives.

These are just a few of the many better options for Windows CHKDSK. If you are having problems with your hard drive, I recommend that you try one of these tools.