Runescape Elemental Workshop IV part 2 of 3 Cosmic Puzzle

Channel:

Denny Ayard

Subscribers:

16,300

Published on March 3, 2011 8:10:36 AM ● Video Link: https://www.youtube.com/watch?v=dTQUCRlYbFs

Game:

RuneScape (2001)

Duration: 9:46

1,807 views

7

When you're done priming, go down another floor and use the keyblade on the door at the end of the hall to gain access to the Cosmic room.


This puzzle is a lot easier than I initially thought it was. Each pillar has four colored holes on each level of itself. The first set of pillars only have one level. The second set has two levels, and the third set has pillars 3 blocks tall. Each horizontal and vertical row of pillars needs to have matching and lined up color holes at a level.

When there is a color carrying through every vertical and horizontal row of pillars, the height of the emitter panels on the walls need to be adjusted to match the height of the lined up color. The rune loaded into an emitter needs to match the color of the color lined in the pillars.

To adjust the pillars and the emitters, mess with the control panel near the yellow dot on your mini-map.

When the emitters, pillars, and runes are correctly aligned, power up the system through the control panel.

Once you complete the third tier of the puzzle, the Cosmic machine will activate. Use the machine to activate a robot that will unlock the Chaos room.

Activate the Cosmic machine once more by powering up the puzzle system once more through the control panel. Put a primed bar on the Cosmic machine jig, take a swig of super restore if you need to, and activate the Cosmic machine to make a Cosmic bar.

Head upstairs to the workbenches of the shop, and use the Cosmic bar on a workbench and make Cosmic gloves, which you need to wear in order to interact with the Chaos machinery.

Other Statistics