Sega Naomi Netboot with WiPi - Part 3

Channel:
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=O_tnaY3Baf8



Duration: 49:13
197 views
5


I've made an adapter harness to replace the SUN brand power supply with an ATX power supply. I've made an adapter to replace the wall plug that powers the Raspberry Pi with a cable that goes from a PC Molex power plug to a micro USB plug. I've made an adapter to replace the wall plug that powers the VGA to HDMI converter with a cable that goes from a PC Molex power plug to a barrel connector. Lastly, I moved the wires that powered the compact flash reader over to power the JVS I/O board.

I've ordered an 'Undamned USB Decoder' board that will allow me to plug a 'fightstick' made for PlayStation or Xbox console into it and then it will output the correct joystick or button press into the JVS I/O board.

The only hitch so far was the barrel power connector going into the VGA to HDMI converter. The inside diameter of the connector was a bit too large which caused the power to cut in and out. Luckily I had another barrel connector that had the correct inside diameter, so that is already fixed.