Sega Naomi Netboot with WiPi - Part 7
Channel:
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=XDCbd4RZIAQ
4Success! Everything is plugged in and inside the PC case, and working!
I've got a wire management problem at the moment but I've got a shorter VGA cable and HDMI cable on the way to help with that. I've also got a piece of metal from the top of the case that I need to cut an opening in for an HDMI connector. I'm not sure where I'll put the VGA to HDMI adapter inside, maybe in the bottom of the case.
I played for a bit after the video and didn't have the problem where the first button stuck. I think there was some dirt or a bit of debris from my workbench that might have been causing the button to stick when I first tried it.
Other Videos By TomsProjects
| 2022-01-18 | Operation Double Double Dragon - Part 6 |
| 2022-01-18 | Operation Double Double Dragon - Part 5 |
| 2021-12-23 | Arkanoid Revenge of Doh sync issue solved. |
| 2021-12-21 | Arkanoid Revenge of Doh sync issue? |
| 2021-12-05 | Operation Double Double Dragon - Part 4 |
| 2021-11-23 | Operation Double Double Dragon - Part 1 |
| 2021-11-23 | Operation Double Double Dragon - Part 3 |
| 2021-11-23 | Operation Double Double Dragon - Part 2 |
| 2021-11-04 | Sega Naomi Netboot with WiPi - Part 9 |
| 2021-11-02 | Sega Naomi Netboot with WiPi - Part 8 |
| 2021-10-26 | Sega Naomi Netboot with WiPi - Part 7 |
| 2021-10-26 | Sega Naomi Netboot with WiPi - Part 6 |
| 2021-10-20 | Sega Naomi Netboot with WiPi - Part 5 |
| 2021-10-20 | Sega Naomi Netboot with WiPi - Part 4 |
| 2021-10-12 | Sega Naomi Netboot with WiPi - Part 3 |
| 2021-10-07 | Sega Naomi Netboot with WiPi - Part 2 |
| 2021-10-07 | Sega Naomi Netboot with WiPi - Part 1 |
| 2021-10-06 | 3D Printed R2D2 - Part 67 |
| 2021-10-01 | 3D Printed R2D2 - Part 66 |
| 2021-09-23 | 3D Printed R2D2 - Part 65 |
| 2021-09-18 | 3D Printed R2D2 - Part 64 |
Tags:
Sega Naomi
arcade