3D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 11

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=_3SQxl_XWkg


Duration: 25:21
2,032 views
29

After 2 months, I've finally started working on the printer again. I found a video of someone else installing the carbon fiber gantry, and that got me motivated to start working on my printer again. Link to the video:
https://youtu.be/cF7x0WPIlGE?si=1XfMwhNoGH_OBIZz

Here I'm showing how I routed the X and Y endstop wires, as it differs from the standard LDO kit.
Next up is finishing up the skirt with touchscreen, then a final check and power on, followed by finally loading firmware!



Other Videos By TomsProjects


2024-09-113D Printed R2D2 - Part 109
2024-09-023D Printed R2D2 - Part 108
2024-09-023D Printed R2D2 - Part 107
2024-07-293D Printed R2D2 - Part 106
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 15
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 14
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 16
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 13
2024-07-093D Printed R2D2 - Part 105
2024-04-233D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 12
2024-03-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 11
2024-03-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 10
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 9
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 8
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 7
2023-11-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 5
2023-11-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 6
2023-10-063D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 4
2023-10-063D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 3
2023-10-063D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 2
2023-10-063D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 1


Tags:
3D Printing
Voron 2.4