3D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 14

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=ttVxbWjYygc


Duration: 15:16
308 views
6

Beginning the Nitehawk-SB setup with the toolhead first. Under the printer wiring will come next, as well as trying to figure out the best way to route the umbilical cable.



Other Videos By TomsProjects


2024-11-12Pacific Northwest R2 Builders Club: 2024 R2 Northwest Builders Expo - Prep and setup.
2024-11-053D Printed R2D2 - Part 112
2024-11-053D Printed R2D2 - Part 113
2024-10-313D Printed R2D2 - Part 111
2024-09-113D Printed R2D2 - Part 110
2024-09-113D Printed R2D2 - Part 109
2024-09-023D Printed R2D2 - Part 108
2024-09-023D Printed R2D2 - Part 107
2024-07-293D Printed R2D2 - Part 106
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 15
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 14
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 16
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 13
2024-07-093D Printed R2D2 - Part 105
2024-04-233D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 12
2024-03-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 11
2024-03-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 10
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 9
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 8
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 7
2023-11-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 5


Tags:
3D Printing
Voron
Nitehawk-SB