3D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 9

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=yFJD9rqrQtM


Duration: 4:35
422 views
5

I'm wiring the underside of the printer now but have hit a little snag. The USB C to USB A connector that links the Octopus main board with the Raspberry Pi is not oriented correctly. The USB A part needs to be angled so the wire comes off the connector towards the front of the printer. Instead, the wire comes off pointing downward.

This cable would be the lowest point of the printer, and if I needed to move the printer, it could possible catch on something. It would also be hard to keep it in the wiring channel, and might put undo stress on the Raspberry Pi connector.

I'll be ordering a replacement cable. I have filled out the contact form on the MatterHackers website with the information, along with the earlier problem I had with one of the triangle shaped brackets that mount the bed rails to the frame being different than the other three brackets.



Other Videos By TomsProjects


2024-09-023D Printed R2D2 - Part 107
2024-07-293D Printed R2D2 - Part 106
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 15
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 14
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 16
2024-07-093D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 13
2024-07-093D Printed R2D2 - Part 105
2024-04-233D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 12
2024-03-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 11
2024-03-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 10
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 9
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 8
2023-12-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 7
2023-11-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 5
2023-11-073D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 6
2023-10-063D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 4
2023-10-063D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 3
2023-10-063D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 2
2023-10-063D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 1
2023-07-251000 Subscribers! Thanks to all!
2023-06-14Joust Cocktail - Part 7


Tags:
3D Printing
Voron 2.4