Tevo Tornado first print.

Tevo Tornado first print.

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=1hJXCVAk6Eo


Duration: 7:39
218 views
1

The first, ok second, print on my Tevo Tornado 3D printer. The first and second were calibration cubes. The first failed about 1/4 of the way through due to the bed being a bit too low, so the cube became detached from the bed.

My second attempt printed OK, although it's about 20.2mm on the X and Y axis rather than 20. I should be able to correct that fairly easily.



Other Videos By TomsProjects


2020-08-113D Printed R2D2 - Part 3
2020-08-113D Printed R2D2 - Part 2
2020-08-113D Printed R2D2 - Part 1
2020-06-11Elite Dangerous: My Fleet Carrier arrives!
2020-06-09Elite Dangerous: Fleet Carrier management
2020-06-09Elite Dangerous: Fleet Carriers Update
2020-04-25Tevo Tornado 3D Printer control box mod
2020-04-233D Printers Update
2020-02-24Tsunami MEGA arcade project - Part 5 - Working!!!
2020-01-16Two 3D printers at the same time.
2020-01-15Tevo Tornado first print.
2019-12-26Tsunami MEGA arcade project - Part 4
2019-10-24Elite Dangerous: PVE combat with TrackIR
2019-10-15Elite Dangerous: Mining with Nick using External Camera
2019-09-25Mining With Nick
2019-09-25Mining with TrackIR - Part 2
2019-09-25Mining with TrackIR - Part 1
2019-09-11Carnevil arcade pedestal to Naomi gun cabinet - Sad Final Video
2019-05-07Tsunami MEGA arcade project - Part 3
2019-05-07Tsunami MEGA arcade project - Part 2
2019-04-25Tsunami MEGA arcade project - Part 1