3D Printed R2D2 - Part 79
5Michael Baddeley R2D2 files:
https://www.patreon.com/mrbaddeley
Wall and infill settings taken from the "Print Guide for R2-D2 v1.2" found here:
https://www.printed-droid.com/files/
The center foot and ankle are now attached! I just received the bolts I ordered to attach the assembly to the center foot support piece that goes in the bottom of R2 and also holds the skirt in place. I'm pretty sure I've ordered the wrong size.
The only information I could find on the Michael Baddeley Facebook page was that they should be 60mm long. Now that I have them, they seem to be too long. I haven't put the support piece into the bottom of the body yet to make sure but if they are too long I can always cut them down. The 60mm size might be for those who print the longer legs and ankle parts that provide more clearance if you plan to put your droid into 2 leg mode.
Other Videos By TomsProjects
| 2023-02-14 | 3D Printed R2D2 - Part 88 |
| 2023-02-14 | 3D Printed R2D2 - Part 87 |
| 2023-02-14 | 3D Printed R2D2 - Part 86 |
| 2023-02-09 | 3D Printed R2D2 - Part 85 |
| 2022-11-03 | Asteroids Deluxe Cabaret - Part 12 |
| 2022-10-26 | 3D Printed R2D2 - Part 84 |
| 2022-10-25 | 3D Printed R2D2 - Part 83 |
| 2022-10-14 | 3D Printed R2D2 - Part 82 |
| 2022-09-28 | 3D Printed R2D2 - Part 81 |
| 2022-09-22 | 3D Printed R2D2 - Part 80 |
| 2022-09-21 | 3D Printed R2D2 - Part 79 |
| 2022-09-12 | 3D Printed R2D2 - Part 78 |
| 2022-09-12 | 3D Printed R2D2 - Part 77 |
| 2022-09-10 | 3D Printed R2D2 - Intermission! |
| 2022-09-09 | 3D Printed R2D2 - Part 76 |
| 2022-08-25 | 3D Printed R2D2 - Part 75 |
| 2022-08-22 | 3D Printed R2D2 - Part 73 |
| 2022-08-22 | 3D Printed R2D2 - Part 74 |
| 2022-07-29 | 3D Printed R2D2 - Part 72 |
| 2022-07-23 | 3D Printed R2D2 - Part 71 |
| 2022-07-23 | Asteroids Deluxe Cabaret - Part 11 |