3D Printed R2D2 - Part 78
11Michael Baddeley R2D2 files:
https://www.patreon.com/mrbaddeley
Wall and infill settings taken from the "Print Guide for R2-D2 v1.2" found here:
https://www.printed-droid.com/files/
Center foot issues. The center foot shell is supposed to be pinched between the lower and upper assemblies but mine wobbles because something is off somewhere. I've ended up printing a 2mm spacer to reduce the gap.
I think 2.5mm might be what's needed to completely eliminate movement of the foot shell but I'm going to go with the 2mm one and see how it is when all bolted together. I think it'll be fine and only allow a small amount of movement.
The way it's designed, the spacer is only increasing the height of the foot shell in relation to the ground. The location of the ankle pin stays the same because that part is not in contact with the spacer.
Other Videos By TomsProjects
| 2023-02-14 | 3D Printed R2D2 - Part 87 |
| 2023-02-14 | 3D Printed R2D2 - Part 86 |
| 2023-02-09 | 3D Printed R2D2 - Part 85 |
| 2022-11-03 | Asteroids Deluxe Cabaret - Part 12 |
| 2022-10-26 | 3D Printed R2D2 - Part 84 |
| 2022-10-25 | 3D Printed R2D2 - Part 83 |
| 2022-10-14 | 3D Printed R2D2 - Part 82 |
| 2022-09-28 | 3D Printed R2D2 - Part 81 |
| 2022-09-22 | 3D Printed R2D2 - Part 80 |
| 2022-09-21 | 3D Printed R2D2 - Part 79 |
| 2022-09-12 | 3D Printed R2D2 - Part 78 |
| 2022-09-12 | 3D Printed R2D2 - Part 77 |
| 2022-09-10 | 3D Printed R2D2 - Intermission! |
| 2022-09-09 | 3D Printed R2D2 - Part 76 |
| 2022-08-25 | 3D Printed R2D2 - Part 75 |
| 2022-08-22 | 3D Printed R2D2 - Part 73 |
| 2022-08-22 | 3D Printed R2D2 - Part 74 |
| 2022-07-29 | 3D Printed R2D2 - Part 72 |
| 2022-07-23 | 3D Printed R2D2 - Part 71 |
| 2022-07-23 | Asteroids Deluxe Cabaret - Part 11 |
| 2022-07-21 | 3D Printed R2D2 - Part 70 |