How to Change & Fix Peeling Thumbsticks on Xbox Series X/S Controller (New Sticks)
8Peeling or worn thumbsticks on an Xbox Series X/S controller (Model 1914) are a common issue due to prolonged use, sweat, or aggressive grip.
Teckman PS5, PS4, Xbox Tools Amazon Affiliate Link: https://amzn.to/42y4dSh
Steps to Change & Fix Peeling Thumbsticks
Step 1: Assess the Damage
Inspect the thumbsticks:
Peeling: If the rubber is peeling or worn but the plastic base is intact, you may only need new thumbstick caps or grips.
Damaged mechanism: If the thumbstick feels loose, drifts, or doesn’t register inputs, the entire thumbstick module (including the analog stick sensor) may need replacement.
Choose the fix:
Caps/Grips: Adhesive thumbstick covers (e.g., KontrolFreek, Grip-iT) can mask peeling without disassembly ($5–$15). These are ideal for minor wear.
Replacement Thumbsticks: Swap the top thumbstick pieces or entire modules for a permanent fix. This guide focuses on replacing the thumbstick tops, as full module replacement requires soldering and advanced skills.
Step 2: Prepare the Controller
Power off and clean:
Ensure the controller is turned off and disconnected from any charging cable.
Wipe with a soft, dry cloth to remove dust or oils.
Remove the battery cover and batteries:
Open the battery compartment on the back and remove the batteries or battery pack.
Set up workspace:
Place a soft cloth or mat on a flat surface to prevent scratches.
Keep screws organized (use a small container or magnetic mat).
Step 3: Disassemble the Controller
Remove the screws:
Locate five T8 Torx screws:
One in the battery compartment (hidden under a sticker; puncture or lift the sticker).
Two in the top grips (near the bumpers).
Two in the bottom grips (near the handles).
Use a T8 Torx screwdriver to remove all five screws. Store them safely.
Pry off the side grips:
Use a plastic spudger or pry tool to gently separate the side grips (plastic pieces on the handles).
Start near the triggers (LB/RB) and work along the seam to release the clips. Be patient, as the clips are tight.
Tip: Press the trigger down and slide a thin pry tool or cardboard into the gap to hold clips open.
Remove the top plate:
Lift the top plastic piece (near the bumpers and triggers) to access the front faceplate. Be careful with the triggers and bumpers, as they may pop out. Note their position for reassembly.
Access the thumbsticks:
Gently pull the front faceplate away from the controller body, starting near the triggers. You don’t need to fully remove the faceplate to access the thumbsticks, but loosening it helps.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission
...
Twitter: https://twitter.com/YourSixStudios?lang=en
Twitch: https://www.twitch.tv/yoursixstudios
Discord: https://discord.gg/6DfFDnK6
Instagram: https://www.instagram.com/yoursixstudios/ -
((( Subscribe to my LIVE STREAMING )))
((( Gaming Channel "YourSixGaming" )))
/ @yoursixgaming ...
((( Subscribe to my ADVENTURE CHANNEL )))
((( Travel, Cameras & More "YourSixAdventures)))
/ @yoursixadventures
Other Videos By YourSixStudios
Other Statistics
The Elder Scrolls Online Statistics For YourSixStudios
Currently, YourSixStudios has 25,052,746 views for The Elder Scrolls Online across 390 videos. His channel currently has around 20 hours worth of content for The Elder Scrolls Online, or 13.20% of the total watchable video on YourSixStudios's YouTube channel.