How to Fix the Stick Drift on Xbox One Controller By Taking Apart Controller (Easy Method)
5To fix stick drift on an Xbox One controller by taking it apart, follow these steps. This involves opening the controller, cleaning or adjusting components, and potentially replacing parts. Be cautious to avoid damage.
Teckman Xbox Cleaning Tools Amazon Affiliate Link: https://amzn.to/42y4dSh
Tools Needed:
T8 Torx security screwdriver
Plastic spudger or pry tool
Small flathead screwdriver (optional)
Isopropyl alcohol (90% or higher)
Cotton swabs or microfiber cloth
Small container for screws
Replacement analog stick module (optional, if cleaning doesn’t work)
Tweezers (optional, for precision)
Steps to Fix Stick Drift:
Disassemble the Controller:
Remove Batteries: Take out the battery pack or batteries and ensure the controller is off.
Remove Hidden Screw: Use the T8 Torx screwdriver to remove the screw in the battery compartment (center, near the top).
Remove Side Grip Screws: Gently pry off the plastic side grip covers using a spudger, starting near the bumpers or bottom grips. Remove the four T8 screws (two per side) underneath.
Separate Shell: Pry apart the top and bottom plastic shells with a spudger, starting near the bumpers or triggers. Work around the edges to release clips. Lift off the bottom shell. The top cover (near bumpers) may pop off or stay attached; remove it carefully if needed.
Organize Parts: Place screws and small parts in a container to avoid loss.
Locate the Analog Stick Module:
Identify the analog stick causing drift (left or right). Each stick is part of a module soldered to the circuit board.
The module has a plastic housing with sensors and a spring mechanism.
Clean the Analog Stick Module:
Apply Isopropyl Alcohol: Dampen a cotton swab or microfiber cloth with isopropyl alcohol. Gently clean around the base of the analog stick, focusing on the area where it meets the module to remove dust, debris, or grime.
Rotate the Stick: Move the stick in all directions while cleaning to ensure alcohol reaches inside the module.
Clean Sensors: If accessible, carefully wipe the sensor areas inside the module with a dry swab to remove residue.
Dry Thoroughly: Use compressed air or let the module air-dry completely to prevent damage to electronics.
Inspect and Adjust the Module:
Check for loose or worn parts in the stick mechanism. If the stick feels overly loose, the internal springs or sensors may be worn.
Gently press the stick module to ensure it’s seated properly on the circuit board. Loose connections can cause drift.
If cleaning doesn’t resolve the issue, the module’s potentiometers (sensors) may be worn out, requiring replacement.
Replace the Analog Stick Module (Optional):
If cleaning fails, replace the faulty module. Purchase a compatible Xbox One analog stick module (available online, e.g., Amazon or repair shops).
Desolder the Old Module: Use a soldering iron to remove the old module from the circuit board. This requires skill; if inexperienced, seek professional help to avoid damaging the board.
Solder the New Module: Attach the new module by soldering its pins to the same points on the circuit board. Ensure proper alignment.
Test Before Reassembly: Temporarily reconnect the controller to test the new module (see step 6).
Test the Controller:
Before fully reassembling, reconnect any ribbon cables and temporarily place the circuit board back in the shell.
Connect the controller to an Xbox One or PC via USB and test the analog stick in a game or the Xbox Accessories app to confirm the drift is gone.
If drift persists, double-check cleaning or consider replacing the module.
Reassemble the Controller:
Reattach the top cover (with bumpers) and ensure clips snap into place.
Place the circuit board back in the bottom shell, reconnecting any ribbon cables.
Snap the top and bottom shells together, ensuring all clips align.
Reattach the side grips, secure the four side screws, and replace the battery compartment screw.
Insert batteries and test again.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission
...
Twitter: https://twitter.com/YourSixStudios?lang=en
Twitch: https://www.twitch.tv/yoursixstudios
Discord: https://discord.gg/6DfFDnK6
Instagram: https://www.instagram.com/yoursixstudios/ -
((( Subscribe to my LIVE STREAMING )))
((( Gaming Channel "YourSixGaming" )))
/ @yoursixgaming ...
((( Subscribe to my ADVENTURE CHANNEL )))
((( Travel, Cameras & More "YourSixAdventures)))
/ @yoursixadventures
Other Videos By YourSixStudios
Other Statistics
Fortnite Statistics For YourSixStudios
Currently, YourSixStudios has 28,431,784 views for Fortnite across 279 videos. His channel currently has around 15 hours worth of content for Fortnite, or 10.04% of the total watchable video on YourSixStudios's YouTube channel.